DENTAL BIOMATERIALS

CERASORB® M is designed to mimic human bone structures with a high degree of reproducibility with the highest purity of any β-tricalcalcium phosphate worldwide providing the potential for full and complete bone remodeling into new bone among various clinical indications.

• No biologic contaminants
• Multi-porosity allowing full participation of bone forming cells and vascular structures important for new bone regeneration
• Various shapes and size granules important to reduce micro-movement during the bone formation process

• Sinus lift
• Alveolar ridge preservation
• Cystic defects
• Socket and ridge preservation
• Periodontal defects
• Intra bony defects
• Implant bed preparation
• Osteotomy

CERASORB® Bioactive is a non-organic, porous, biocompatible bone graft containing 4% silicon made for filling, bridging and reconstruction of bone defects and augmentation of the atrophied alveolar ridge. This fully resorbable material provides the potential to increase bioactivity.

Compared to materials of biological origin, CERASORB® Bioactive eliminates laborious treatment with alkali and heat for the removal of organic components.

• 100% non-organic, safe bone regeneration material
• Scaffold principle with 75% porosity for immediate start of osseointegration
• Mainly resorbed after 4 – 6 months
• Radiopaque

• Sinus lift
• Socket and ridge preservation
• Periodontal defects
• Horizontal and vertical augmentation

CERASORB® Foam is a highly porous combined material made of high-quality type 1 collagen and pure-phase β-tricalcium phosphate granules of different sizes and densities. The 3-dimensional collagen matrix embeds the granules and stabilizes them by virtue of its fibrous structure. This special combination of the two materials provides a high volume stability during the bone formation process.

• Support of early bone formation due to β-tricalcium phosphate and collagen combination
• Mouldable to the form of the defect
• Very easy handling

• Socket and ridge preservation
• Sinus floor elevation
• Implant bed preparation
• Small bone and periodontal defects
• Alveolar ridge reconstruction
• Cystic defects

 Fast and easy to use are the attributes that describe CERASORB® Paste which contains very fine granules of   CERASORB® M suspended in a hyaluronic acid matrix.

This special, patented combination optimally supports the physiological healing process. Hyaluronic acid is a naturally occurring component of the extracellular matrix in humans. Results from recent laboratory studies show that it promotes the differentiation of stem cells into osteoblasts, and in addition has anti-inflammatory action.

• Injectable bone void filler
• Sterile packed and ready to use
• Fully resorbed and remodeled into new bone tissue

• Internal sinus lift
• Small bone and periodontal defects
• Small cystic defects

OSBONE® is a non-organic, spongious bone graft material for filling bone defects and augmentation of the atrophied alveolar ridge. This product provides a optimized scaffolding for rapid and maximally stable bone replacement and high volume stability.

Compared to materials of biological origin, OSBONE®, as a purely synthesized material, eliminates the need for aggresive treatment with alkali and heat to remove organic components.

• Safe, non-organic bone replacement material
• Optimized for space maintenance
• Scaffold principle
• 80% porosity
• Immediate start of osseointegration, which is completed after approx. 3-6 month

• Sinus lift
• Socket and ridge preservation
• Peri-implant defects
• Horizontal and vertical augmentation

 OSGIDE® is the membrane of choice for various dental indications requiring defect protection. It is designed with easy handling and guided tissue regeneration capacities in mind.

OSGIDE® provides excellent healing and supports full barrier properties while remodeling into host soft tissues.

• Easy to stretch and suture
• Does not stick or tear
• Supports formation of new blood vessels
• Hydration within seconds

• Guided tissue regeneration (GTR)
• Periodontal defects
• Socket preservation
• Protection of the Schneiderian membrane during sinus lift procedures

Ti-SYSTEM is a non-resorbable pin fixation system that offers a convenient, straight forward solution for safe, fast and easy fixation of foils and membranes for bone augmentation surgery – as well as their safe, fast and easy removal. The titanium pins assure a reliable positioning and fixation of the membranes and foils.

The included easy to use steribox provides storage and sterilization containment.

• Convenient handling: drive in, screw out
• All parts available separately
• 3mm pins for normal bone conditions
• 5mm pins for soft bone conditions

• Bone grafting surgery

stypro® is an absorbable, topical hemostatic sponge. The porcine sponge accelerates clot formation by enhancing platelet aggregation. The blood components interact with the enlarged surface area of the sponge providing an optimized solution for intra-operative blood control.

• Excellent interconnective porosity
• Stable sponge structure
• Hight absorption capacity (35 times of its own weight)
• Fully resorbable within 4 – 6 weeks
• Uses the natural property for coagulation of blood
• Containes no additional active substances

• Dentoalveolar surgery and extraction of teeth (also in patients with risk of hemorrhages)
• Regeneration of mucosal tissues
• Removal of mandibular cysts
• Surgical removal of oral tumors and leucoplakias
• Surgical treatment of periapical and dental abscesses
• Maxillofacial surgery

Ritter Implants are made of a “Grade 5” Titanium alloy (Ti6AL4VELI: 90 % Titanium, 6 % Aluminum, 4 % Vanadium), which goes through a special sandblasting and etching process.

Our method creates large surface differences that allow strong adsorption of plasma proteins and blood into themicropores of the implant immediately after insertion. All Implants are covered by SLA surface. 

This item is used to shape the gums

after the implants have been placed and healed. 

The diameters, heights, and shapes are to be decided by the dentist as to prepare and shape the gums for the final Crown/Prosthesis.

Impression Copings, Impression Pins, Impression Abutments, Impression Posts, or Scan Body/Abutment– they all mean the same.

These are used to register the depth and orientation of the Implant inside the bone as it relates to the surrounding teeth so that the laboratory can fabricate the crown/ Final Prosthesis.

Angled Closed Tray – This allows a doctor to take an Impression of two angled implants at the same time that would otherwise not be possible and require two Impressions to be taken – this makes Ritter unique!

Traditionally, these abutments are manufactured to encompass incremental heights, incremental gingival heights and incremental angles – while the crown would compensate/or compensate for

intermediary angles/heights and be cemented to the abutment in the mouth.

The diameters, heights and shapes are to be decided by the dentist as to prepare and shape the gums for the final crown/prosthesis. 

All Abutments are supplied with TSA-8.3

Implant Level Screw OR for NL Line with

NL-TSA-8.3 screw.

Traditionally, these abutments are manufactured to encompass incremental heights, incremental gingival heights and incremental angles – while the crown would compensate/or compensate for

intermediary angles/heights and be cemented to the abutment in the mouth.

The diameters, heights and shapes are to be decided by the dentist as to prepare and shape the gums for the final crown/prosthesis. 

All Abutments are supplied with TSA-8.3

Implant Level Screw OR for NL Line with

NL-TSA-8.3 screw.

In 1972, the Zest Locator Company perfected the Overdenture Abutment and patented the Locator. The original Locator was proven to provide better retention than the ball attachment and remains the most popular overdenture abutment in the world. They use the same principle as the ball attachment with a metal cap and silicon inserts for cushioning. We do not make these so the screw driver is different. Also Note it is expensive and all parts are sold separately. In Recent years the Zest Corporation has launched two new versions of the Locator. In an effort to offer a wider range of angle correction they produced the R-TX. The top portion of the abutment allows the metal housing to swivel. The thought was they could give the same retention and allow for greater angulation in Implant placement.

As shown, ball attachments are screwed into the Implant to hold a denture in place – they were the first products invented to hold a denture in the mouth without glue. A metal cap is placed and imbedded into the plastic denture – aligning with the location of where the ball attachment will protrude from the Implant. The polyamide inserts are simply shock absorbers.

These products were originally designed to place 2 implants on each side of the mouth.

Ritter Multi Abutments have been manufactured with a wider stronger M1.6 screw instead of a M1.4 screw that most companies use on Multi unit restorations. Ritter offers this packaged with very commonly used accessories making it simple for a dentist to order parts. #19 Ritter makes this for its 3.0 and 3.3 Narrow line platform #20 and most companies narrow platform are strong enough to support this type of abutment on such narrow Implants.

Our Complete surgical kit is second to no one. It contains all the items of the Compact Kit – except the Stoppers are built into each drill – there is a drill for every Implant we produce and more!